VENT CLIP PUR
High-quality flexible exhaust hose made of polyurethane film with a wall thickness of 0.3 mm, designed for the extraction of wood dust. Reinforced with a metal...
Best for: Fine dust, Air and ventilation
Or send a photo of the spigot to an applications engineer. Selection and quote within 1 working day.
Quote request+48 24 366 43 13The currency depends on the country in the order: Poland in PLN, EU countries in EUR. From outside the EU, including Norway and Russia, we accept requests for quotation.
High-quality flexible exhaust hose made of polyurethane film with a wall thickness of 0.3 mm, designed for the extraction of wood dust. Reinforced with a metal...
Best for: Fine dust, Air and ventilation
High quality dust extraction flexible hose for wood dust, made of abrasion resistant transparent polyurethane with a wall thickness of 0.45 mm. Reinforced with a...
Best for: Sawdust and shavings, Fine dust
High-quality wood chip extraction hose made of transparent polyurethane with a wall thickness of 0.6 mm. Reinforced with a copper-plated cast spring steel spiral,...
Best for: Sawdust and shavings, Fine dust
High-quality extraction hose made of transparent polyurethane with a wall thickness of 0.7 mm. Reinforced with a copper-plated cast spring steel spiral, providing...
Best for: Sawdust and shavings
High-quality hose for extracting plastic granules, made of transparent polyurethane with a wall thickness of 1.4 mm. Reinforced with a copper-plated cast spring...
Best for: Granules
High-quality abrasion resistant hose for transporting sand, grain, granules, grit, aggregate, gravel, abrasive materials and glass cullet. Made of transparent...
Best for: Granules, Abrasive materials
A quick selection guide based on our catalogue data sheets. If the material is both abrasive and hot, call our advisor.
| Job | Select | Why | Link |
|---|---|---|---|
| Sanding dust, light extraction systems | VENT PUR P45 or VENT CLIP PUR | A thin wall is enough, and the hose stays light and inexpensive over long runs. | P45 |
| Chips from saws, planers and CNC machines | VENT PUR P60 | The most common choice for sawmills. Compression of 1:4 makes fitting on extraction arms easier. | P60 |
| Long extraction runs | VENT PUR P70 | The smooth inner wall reduces flow resistance. | P70 |
| Plastic granules, regrind | VENT PUR P140 | The 1.4 mm wall withstands the sharp edges of the granules. | P140 |
| Abrasive media, conveying units, loading | VENT PUR XL | A 2.5 mm wall for media that scour the hose from the inside. | XL |
Guide in 2 parts.
In joinery shops, sawmills and furniture plants, woodworking produces wood dust, chips and sawdust that the dust extraction system has to pick up at the machine and convey to the filter or silo. This is where a hose wears out fastest: it runs under negative pressure, bends at every workstation, and the material moving through it abrades it from the inside. That is why you choose it not by diameter alone but by what passes through it and how much.
The hoses in this group are made of polyurethane (PUR) reinforced with a spring steel spiral. Polyurethane stands up to abrasion far better than PVC, and the spiral keeps the hose from collapsing under negative pressure, so the hose can be routed in tight bends around the machine. The working range of -40 °C to +90 °C covers the conditions of a typical production hall.
The deciding factor is a wall thickness matched to the material. The finer and lighter the dust, the thinner the wall can be; the larger and sharper the particles, the more it pays to go for thicker polyurethane, because it lasts longer.
The hose is one thing. The other is a diameter matched to the required airflow and a conveying velocity at which sawdust does not settle in the line. Too low a velocity clogs the system, too high a velocity increases resistance and noise. We show how to choose a hose for a workstation using the example of extraction on CNC machines, and the full picture is in our section applications: woodworking.
All diameters, production lengths and net prices per meter are listed on the product pages. Stock items ship within 24 h; special diameters or lengths are made to order. Not sure which type fits your machine? Send us an enquiry with a photo of the connection spigot and we will reply with the part number and price.