Skip to content
Industrial hose manufacturer, Poland. Advice: +48 24 366 43 13, Mon-Fri 8-16Technical advice: +48 24 366 43 13
Prices:
Official online shop
Application

Hoses for chemical fumes, paint shops and fume hoods

Short answer: for fume extraction in a lab hood, VENT CLIP PE (polyethylene, up to +85 °C) does the job. For aggressive fumes and acids, go with VENT CLIP PTFE (from -150 °C to +250 °C) or VENT CLIP VITON (up to +210 °C, ozone and UV resistant). The double-wall versions PTFE H, S and V combine a PTFE inner liner with an outer fabric matched to the temperature range.

Recommended for this application
  • Chemical Hoses

    VENT CLIP PE

    High-quality flexible chemical resistant hose made of polyethylene fabric coated on both sides with polyethylene, designed for air ventilation and conditioning....

    Temp.
    -40 °C do +85 °C
    Diameters
    DN 45 to 900
    from 22,00 zł / mexcl. VAT
    Choose diameterMade to order
  • Chemical Hoses

    VENT CLIP PTFE

    High-quality flexible chemical hose made of fiberglass fabric coated on both sides with PTFE. The chemical hose is designed for the safe transport of chemically...

    Temp.
    -150 °C do +250 °C
    Diameters
    DN 45 to 900
    from 95,00 zł / mexcl. VAT
    Choose diameterMade to order
  • Chemical Hoses

    VENT CLIP PTFE EX

    Conductive PTFE laminated fabric for chemically aggressive media in ATEX zones. From -150 °C to +280 °C.

    Diameters
    DN 50 to 900
    from 250,00 zł / mexcl. VAT
    Choose diameterMade to order
  • Chemical Hoses

    VENT CLIP PTFE H

    High-quality double-layer hose for suction and delivery of aggressive chemicals. The inner layer is made of PTFE film, while the outer layer is made of polyester...

    Temp.
    -40 °C do +175 °C
    Diameters
    DN 50 to 900
    from 138,00 zł / mexcl. VAT
    Choose diameterMade to order
  • Chemical Hoses

    VENT CLIP PTFE H EX

    Two-layer: conductive PTFE film on the inside, hypalon fabric on the outside. For chemical media in ATEX zones, up to +175 °C.

    Diameters
    DN 50 to 900
    from 170,00 zł / mexcl. VAT
    Choose diameterMade to order
  • Chemical Hoses

    VENT CLIP PTFE S

    High-quality double-layer chemical hose. The inner layer is made of PTFE film, while the outer layer is made of fiberglass fabric coated with silicone. The...

    Temp.
    -70 °C do +250 °C
    Diameters
    DN 50 to 900
    from 179,00 zł / mexcl. VAT
    Choose diameterMade to order

What to consider

  • Medium. Solvents and paints: PTFE or VITON. Lab hood fumes at low temperatures: PE. Don't guess, just tell us the substance name.
  • Temperature. PE up to +85 °C, PTFE V up to +70 °C, PTFE H up to +175 °C, VITON up to +210 °C, PTFE and PTFE S up to +250 °C.
  • External environment. Hypalon coating (PTFE H) and Viton resist ozone and UV, making them suitable for outdoor use and near UV lamps.
  • Compressibility. Most CLIP types compress 1:6, PTFE V compresses 1:4, which makes installation on extraction arms easier.

Common questions

Is a PVC hose suitable for solvent fumes?

Not for continuous use. Solvents damage PVC. For paint fumes, use PTFE or VITON.

What hose for a laboratory fume hood?

VENT CLIP PE up to +85 °C for low-aggressiveness fumes. For acids and high temperatures, VENT CLIP PTFE.

We'll find the right hose for you

Give us the machine, connector diameter and medium. We'll get back to you with a specific type and price.

Ask about selection