Skip to content
Industrial hose manufacturer, Poland. Advice: +48 24 366 43 13, Mon-Fri 8-16Technical advice: +48 24 366 43 13
Prices:
Official online shop
Application

Exhaust extraction hoses for auto repair shops

Short answer: for passenger cars go with VENTCAR 200 (up to +200 °C, with a plastic protector that shields the paint), for trucks use VENTCAR 300 with Kevlar fabric rated to +300 °C. For diesels under load and on dynamometers, reach for VENT CLIP HT 450, HT 650, or HT 1100.

Recommended for this application
  • Exhaust Gas Hoses

    VENT CLIP CAR

    High-quality flexible extraction hose made of specially coated heat-resistant fabric with kevlar reinforcement, designed for extracting very hot air. Reinforced with...

    Temp.
    -60 °C do +300 °C
    Diameters
    DN 45 to 900
    from 128,00 zł / mexcl. VAT
    Choose diameterMade to order
  • Exhaust Gas Hoses

    VENT CLIP HT 1100

    High-quality three-layer exhaust hose. The inner layer is made of fine mesh from high-grade steel, the middle layer is a heat-resistant textile fabric and the outer...

    Temp.
    -20 °C do +1100 °C
    Diameters
    DN 75 to 900
    from 857,00 zł / mexcl. VAT
    Choose diameterMade to order
  • Exhaust Gas Hoses

    VENT CLIP HT 450

    High-quality flexible, double-layer exhaust hose. The inner layer is made of heat-resistant, impregnated fiberglass fabric, while the outer layer is made of...

    Temp.
    -20 °C do +450 °C
    Diameters
    DN 50 to 900
    from 174,00 zł / mexcl. VAT
    Choose diameterMade to order
  • Exhaust Gas Hoses

    VENT CLIP HT 650

    High-quality flexible, double-layer exhaust hose. The inner and outer layer are made of heat-resistant fabric reinforced with stainless steel fibers. The extraction...

    Temp.
    -20 °C do +650 °C
    Diameters
    DN 50 to 900
    from 420,00 zł / mexcl. VAT
    Choose diameterMade to order
  • Exhaust Gas Hoses

    VENT CLIP ISO CAR

    High-quality flexible, double-layer exhaust hose. The inner layer is made of heat-resistant, impregnated fiberglass fabric, while the outer layer is made of...

    Temp.
    -60 °C do +300 °C
    Diameters
    DN 50 to 900
    from 183,00 zł / mexcl. VAT
    Choose diameterMade to order
  • Exhaust Gas Hoses

    VENTCAR 200

    High-quality flexible extraction hose made of polyester fabric coated on both sides with neoprene, designed for removing exhaust fumes from passenger car engines....

    Temp.
    -35 °C do +200 °C
    Diameters
    DN 63 to 450
    from 90,00 zł / mexcl. VAT
    Choose diameterMade to order

What to look for

  • Exhaust temperature. Passenger cars at idle: up to +200 °C (VENTCAR 200). Trucks and diesels: +300 °C (VENTCAR 300, VENT CLIP CAR). Dynamometers and extended operation under load: HT 450, HT 650, HT 1100.
  • Protector. A hose dragged across the floor and rubbing against a bumper needs a plastic protector, which both VENTCAR 200 and 300 have.
  • Compressibility. VENTCAR 200 compresses 1:4, VENT CLIP CAR 1:6, so after use the hose disappears into a reel or up to the ceiling.
  • Connection. CLIP versions attach to the exhaust port with a clip clamp. Check the diameter of the exhaust tip and the inlet nozzle.

Common questions

Which hose works with a ceiling reel?

VENTCAR 200 or VENT CLIP CAR in the nozzle diameter you need. Both compress axially and retract into the reel without kinking.

Can one hose handle both passenger cars and trucks?

VENTCAR 300, rated to +300 °C, works for both. For passenger cars only, VENTCAR 200 is enough.

We'll match the right hose for you

Tell us the machine, the port diameter, and the medium. We'll get back to you with a specific model and price.

Ask about sizing