Skip to content
Industrial hose manufacturer, Poland. Advice: +48 24 366 43 13, Mon-Fri 8-16Technical advice: +48 24 366 43 13
Prices:
Official online shop
Application

Hoses for Plastic Granulate and Regrind

The short answer: for conveying plastic granulate, go with VENT PUR P140 (polyurethane, 1.4 mm wall, antistatic, flame-retardant). When the material is abrasive on the inside, such as regrind or sharp regranulates, use VENT PUR XL with a 2.5 mm wall. For hot granulate straight from a dryer, the two-layer VENT SIL 2 handles temperatures up to +250 °C.

Recommended for this application
  • Abrasion-Resistant Polyurethane Hoses

    VENT PUR P140

    High-quality hose for extracting plastic granules, made of transparent polyurethane with a wall thickness of 1.4 mm. Reinforced with a copper-plated cast spring...

    Temp.
    -40 °C do +90 °C
    Diameters
    DN 20 to 254
    from 54,00 zł / mexcl. VAT
  • Abrasion-Resistant Polyurethane Hoses

    VENT PUR XL

    High-quality abrasion resistant hose for transporting sand, grain, granules, grit, aggregate, gravel, abrasive materials and glass cullet. Made of transparent...

    Temp.
    -40 °C do +90 °C
    Diameters
    DN 40 to 102
    from 110,00 zł / mexcl. VAT

What to look for

  • Wall thickness for abrasion resistance. Granulate: 1.4 mm (P140). Regrind and sharp edges: 2.5 mm (PUR XL, extruded, airtight).
  • Antistatic properties. Granulate builds up static charge during conveying. VENT PUR P140 is antistatic and flame-retardant.
  • Temperature. Polyurethane hoses operate from -40 °C to +90 °C. For hot granulate after drying: VENT SIL 2 (silicone, up to +250 °C).
  • Oils and fumes. Both polyurethane hoses resist oils, petrol, and their vapours, so they hold up well around injection moulding machines.

Common questions

Which hose to use from the dryer to the injection moulder?

For warm granulate up to +90 °C, use VENT PUR P140. For hot material straight from the dryer, go with VENT SIL 2 with its smooth inner wall.

How often should the hose be replaced when conveying regrind?

It depends on the material. The 2.5 mm wall of VENT PUR XL lasts several times longer than a 1.4 mm hose. Check for wear at bends.

We'll find the right hose for you

Tell us the machine, nozzle diameter, and material. We'll get back to you with a specific model and price.

Ask about selection